Product Introduction
Sand removal function is a feature of solar-powered pump systems that helps to prevent clogging and damage caused by sand and other debris. The feature uses a special filter and impeller design to remove sand and other particles from the water before it enters the pump. This helps to improve the efficiency of the system and prolong the lifespan of the pump.
Specification
|
Product Name |
Sand Removal Function |
|
Input Voltage |
DC 12V-24V |
|
Max Flow Rate |
5 m3/h |
|
Max Head |
50 m |
|
Protection Level |
IP68 |
|
Operating Temp. |
-20°C to 60°C |
|
Safety Standard |
Complies with relevant standards |
Product Benefits
Prevents Clogging: Sand removal function prevents clogging and damage caused by sand and other debris.
Improves Efficiency: The feature improves the efficiency of the system by removing sand and other particles from the water before it enters the pump.
Prolongs Pump Lifespan: Sand removal function helps to prolong the lifespan of the pump by reducing the risk of damage caused by sand and other debris.
Easy Maintenance: The feature is easy to maintain and requires minimal maintenance.
Application
Sand removal function is a useful feature in solar-powered pump systems used for agricultural irrigation, livestock watering, and domestic water supply. It can be used in wells, boreholes, rivers, and other water sources with high levels of sand and other debris.
Pictures
FAQ
Q: How does sand removal function work?
A: Sand removal function uses a special filter and impeller design to remove sand and other particles from the water before it enters the pump. This helps to prevent clogging and damage caused by sand and other debris.
Q: Is sand removal function compatible with all types of solar-powered pumps?
A: Sand removal function is designed to be compatible with most types of solar-powered pumps. It is important to ensure that the system is compatible with the pump used in the system.
Q: Does sand removal function require additional maintenance?
A: Sand removal function is easy to maintain and requires minimal maintenance. The filter should be cleaned periodically to ensure proper operation.
Q: What is the maximum flow rate and head for sand removal function?
A: The maximum flow rate for sand removal function is 5 m3/h, and the maximum head is 50 m.
Hot Tags: sand removal function, China sand removal function manufacturers, suppliers, factory, Full Water Level Delay, solar powered insecticide spraying pump, MPPT, High Level Float Alarm, Water Level Detection System, Solar Powered Pump Drives